Qingtuo Metal Products (Qingdao)Co.,Ltd
The next position is your Customer
Add to Cart
NO.1 Finish Hot Rolled Stainless Steel Sheet 430 8mm Thickness Length 6 m
304 stainless steel coil has good formability, its deep drawing performance is excellent, similar to 304
steel. It has strong corrosion resistance to oxidized acid, and has certain corrosion resistance to lye and
most organic acids and inorganic acids. Stress corrosion cracking resistance is stronger than 304 steel.
430 price is cheaper than 304 steel, which is often used as an alternative to 304.
Product introduction:
| Commodity | NO.1 Finish Hot Rolled Stainless Steel Sheet 430 8mm Thickness Length 6 m |
| Grade | 430 |
| Brand | TISCO ,BAOSTEEL,POSCO,JISCO,LISCO |
| Certification | SGS,BV,IQI,TUV,ISO,etc |
| Thickness | 8 mm |
| Width | 1500 mm |
| Length | 6000 mm |
| Surface | NO.1 |
| Standard | JIS,AISI,ASTM,GB,DIN |
| Delivery time | About 15 -30 days or based on the sales contract |
| MOQ | 1 Ton |
| Advantages | The thermal conductivity is stronger than austenite, the coefficient of thermal expansion is smaller than austenite, heat resistance fatigue, the addition of stabilizing element titanium, the mechanical properties of weld parts are good. |
Product Display :
Chemical Composition:
| Grade | C | Si | Mn | P | S | Ni | Cr | |
| 430 | ≤0.12 | ≤1.00 | ≤1.00 | ≤0.040 | ≤0.03 | 16.00～18.00 |
Physical Property:
| Grade | Tensile Strength(Mpa) | Yield Strength(Mpa) | Elongation(%) | HBW | HRB | HV |
| 430 | ≥450 | ≥205 | ≥22 | ≤183 | ≤88 | ≤200 |
Surface Finish:
| Surface Finish | Definition | Application |
| 2B | Finished by heat treatment, pickling after cold rolling. Followed by skin pass line to be more brighter and smooth surface | General application Medical instruments, Tableware |
| BA | Bright heat treament after cold rolling | Kitchen utensil, kitchenware, architectural |
| 8K | A mirror-like reflective surface by polishing with finer abrasives over 800mesh | Construction, mirrors, plate sets, decoration elevators |
| HL | Finished by continuous linear polishing | Architectural purpose, Escalators, kitchenware, vehicles |
| NO.1 | Finished by hot rolling, annealing and picking, characterized by white pickled surface | Chemical industry Equipment, industrail tanks |
| NO.4 | Polishing with NO.150 to NO.180 mesh abrasives specified in JISR6001 | Kitchen utensils, Building Construction, Medical equipment |
Packing:
Stainless Steel 6 Meter Length STS410 STS420j1 STS430 Inox Slit Edge Plate Packing 2 types:
l Standard packing
l Fine packing